Search This Blog

Friday, July 2, 2010

Cisco 7200 Simulator

The following Cisco 7200 Port Adapters (PA) are currently supported:

  • FastEthernet cards "C7200-IO-FE" and "PA-FE-TX" based on DEC21140 chip
  • FastEthernet cards "C7200-IO-2FE" and "PA-2FE-TX" based on Intel i8254x chips
  • GigabitEthernet cards "C7200-IO-GE-E" and "PA-GE" based on Intel i8254x chips
  • Ethernet cards "PA-4E" and "PA-8E" based on AMD Am79c97x chips
  • ATM card "PA-A1" based on Texas Instruments Tneta1570 chip
  • Serial cards "PA-4T+" and "PA-8T"
  • POS (Packet over Sonet) card "PA-POS-OC3" (experimental, only works with recent IOS images)


The following Cisco 3600 (3620,3640,3660) Network Modules (NM) are currently supported:

  • Ethernet cards: "NM-1E", "NM-4E" and "NM-1FE-TX", all based on AMD Am79c97x chips
  • Ethernet switching module: "NM-16ESW"
  • Serial card "NM-4T"


The following Cisco 2691/3725/3745 Network Modules (NM) are currently supported:

  • FastEthernet cards: "NM-1FE-TX"
  • Ethernet switching module: "NM-16ESW"
  • Serial card "NM-4T"


The following Cisco 2600 Network Modules (NM) are currently supported:

  • Ethernet cards: "NM-1E", "NM-4E" and "NM-1FE-TX"
  • Ethernet switching module: "NM-16ESW"

1 comment:

  1. hostios = True
    [localhost]

    [[2691]]
    image = /data/tftpboot/C2691-IP.BIN
    ram = 128
    slot1 = NM-4T

    [[ROUTER PSTN]]
    model = 2691
    f0/1 = S4 1
    s1/0 = HQ s1/0
    s1/1 = RS1 s1/0
    s1/2 = RS2 s1/0

    ReplyDelete